 
 
CAN InstrumentsPowerView™ PVCAN Series PowerView™ PVCAN is a series of intelligent gauges designed to display easy-to-read information broadcast over the SAE J1939 communications. These gauges are wired directly to the J1939 CAN bus, without the need of a display, interface or other device to drive them. PVCAN gauges include features such as a smooth stepper motor operation for the 270° sweep pointer, environmental sealing to IP68 including two Deutsch DT style connectors molded into the casing, and green LED back lighting. They are available for standard 2-1/6” (52mm) and 3-3/8” (86mm) diameter hole sizes. In addition, their polycarbonate cases incorporate a “D” shape allowing panel cutouts that eliminate gauge rotation during installation. All PowerView™ gauges can be powered by 12 or 24 VDC systems. PowerView™ analogue gauges, for direct connection to J1939 CAN networks. IP68 sealing, front and back. PVA and PVAA Series PowerView™ PVA series premium gauges provide highly visible, analogue display of J1939 engine parameters, including oil/gearbox pressure, coolant temperature and engine speed. Engine data is transmitted from the PowerView™ PV101 and PV750 modules to the gauges via a twisted pair RS485 Modbus link. PVA gauges are available with selection of lens and bezel styles and colours. All models feature IP68 environmental sealing with Deutsch DT style connectors and casing, and dimmable green backlighting. PVA35 series (3.6"/92mm face) models are used for tachometer and speedometer indication; PVA20 series (2.3"/59 mm) gauges are used to indicate engine/gearbox pressures, temperatures and other parameters. The PVAA20 is a matching audible alarm, with operator-initiated, timed mute feature and outputs for driving external alarm devices. PowerView™ analogue gauges, for direct connection to J1939 CAN networks. IP68 sealing, front and back. PVM The PowerView™ PVM series is a range of cost effective, easy-to-read gauges for use with electronically controlled (SAE J1939 CANbus) engines. PVM gauges operate with the PowerView™ range of display modules, via a single RS485 twisted pair MODBUS RTU serial link. The gauges can be daisy-chained using quick-connect harnesses. The major feature of the PVM gauges is their balance between design and functionality. These modern gauges offer a selection of bezel styles and colours. The PVM gauges also include smooth stepper motor operation with 270° sweep pointer, an environmentally sealed case with two Amp Mini Universal Mate-N-Lok connectors molded into the casing, and green LED back lighting. PowerView™ analogue gauges, for direct connection to J1939 CAN networks. IP68 sealing, front and back. PVS-5 The PVS-5 Power Supply enables PVM gauge compatibility with existing MurphyLink products, such as the PV1000, Cascade, iGuard and eGuard. The PVS-5 supplies 5 Volts of external power and load dump protection for up to six PVM gauges. MLA20, MLA35, MLAA20 These MurphyLink™ analogue-style indicating gauges are a designed to display information transmitted by the Murphy Display and Diagnostic Module (MDDM). Communication from the MDDM to MLA gauges and MLAA audible alarm is via an RS485 twisted pair proprietary serial link. These MurphyLink™ components are environmentally sealed, with an LED back light (green). Deutsch | English
Service PartnersFind a Service Partner worldwide Dealer and service partnersGermany/Austria/Switzerland DownloadsBrochures, data sheets and manuals |